Attenuators
Type N, TNC, BNC, SMP

  • 2 watts
  • DC - 26.5 GHz
  • 1 - 60 dB
  • Small Size
  • Flat Response

 General Specifications
 Inpedance 50 ohms
 Connectors Type N, TNC, BNC, SMP to MIL-C-39012
AN06-xxBR Type N Plated Brass
 Standard Cononfiguration Male Input / Female Output
Single sex versions also available
 Operating Temperature -65 +125C (SMP -55 +85C)
                  (AN06-XXBR -20 +85C)
 Power Derating Linear to +125C

Model No Conn
Type 		Freq Range
GHz 		Standard Attenuation Values (dB) Atten Accuracy VSWR (max) Average Power (watts) Figs
1-6
dB		 7-12
dB 		7-20
dB		 13-20
dB 		21-30
dB		 31-40
dB		 41-60
dB		 25C 125C
AN02-XX N DC-2.5 0-10, 12, 15, 20, 30, 40, 50, 60 0.3 - 0.5 - 0.75 1.5 1.5 1.25 2.0 0.5 1 & 2
AN06-XX N DC-6.0 0-10, 12, 15, 20, 30, 40, 50, 60 0.3 - 0.5 - 0.75 1.5 1.5 1.20 2.0 0.5 1 & 2
AN06-XXBR N DC-6.0 1-10, 12, 15, 20, 30 40 0.3 - 0.5 - 0.9 1.5 - 1.25 2.0 1.1 @+85C 1
AN12-XX N DC-12.4 0-10, 12, 15, 20, 30, 40, 50, 60 0.3 - 0.5 - 0.75 1.5 1.5 1.25 2.0 0.5 1 & 2
AN18-XX N DC-18.0 0-10, 12, 15, 20, 30, 40, 50, 60 0.3 - 0.5 - 0.75 1.5 1.5 1.35 2.0 0.5 1 & 2
                             
AT18-XX TNC DC-18.0 0-10, 12, 15, 20, 30, 40, 50, 60 0.3 - 0.5 - 0.75 1.5 1.5 1.35 2.0 0.5 3 & 4
ANC04-XX BNC DC-4.0 0-10, 12, 15, 20, 30 0.3 - 0.5 - 0.75 - - 1.25 2.0 0.5 5
                             
ASM18-XX SMP DC-18.0 0-13, 20, 30 0.4 0.6 0.6 0.8 0.8 - - 1.35 2.0 0.5 6 & 7
ASM26-XX SMP DC-26.5 0-4, 6, 10, 20, 30 0.6 0.8 - 1.2 1.2 - - 1.45 2.0 0.5 6 & 7

Options:
  • For single sex versions use suffix "M" (male) or "F" (female) after model no.
  • Dimensions are for male / female connectors. Please ask for size of single sex versions.

FIG Conn
Type 		Attenuation
(dB) 		Dimensions
inches (mm)
Length L Diameter D
1 N 0-30 & 40 1.76 (44.7) 0.62 (15.8)
2 N 31-60 (except 40dB) 2.04 (51.8) 0.62 (15.8)
3 TNC 0-30 & 40 2.07 (52.5) 0.56 (14.2)
4 TNC 31-60 (except 40dB) 2.35 (59.7) 0.58 (14.8)
5 BNC 0-30 1.36 ()34.5 0.50 (012.7
6 SMP 0-12 0.61 (15.49) 0.25 (6.4)
7 SMP 13, 20, 30 0.74 (18.8) 0.25 (6.4)

Notes: (1) Attenuation values shown as 0-13dB are in 1dB increments.
(2) Max VSWR is shown at highest operating frequency, VSWR is lower at lower frequencies.
(3) For complete part number add attenuation value in place of -XX, e.g. AA18-06 for 6dB.
(4) For complete SMP part number add F for full detent (force to engage 15 lbs) or L for limited detent (force to engage 5 lbs), e.g. ASM-03L for 3 dB limited detent SMP male / female.




Outline is a typical illustration only, for detailed outlines please consult factory.


We reserve the right to change standard product specifications without notice but will be pleased to consider control drawings for quotation.
T: +44 (0)1376 550220 F: +44 (0)1376 552145 E: sales@atlantecrf.com 40A Springwood Drive, Braintree, Essex CM7 2YN, England