Oscillator OCXO
Model No. AOC-100-10.000

  • Frequency 10MHz
  • Temperature Stability +/-5ppb max.
  • Low Phase Noise
  • Low Harmonics
 General Specifications
 Nominal Frequency 10MHz
 Frequency Stability  
 with Temperature +/-5ppb max.
 with Supply Voltage +/-0.5ppb max. for a +/-5% change
 with Load +/-0.5ppb max. for a +/-5% change
 with Ageing Per Year +/-20ppb max.
 All causes after 2 years +/-50ppb max.
 Calibration @ +25C  
 Tolerance (1 hour after switch on) +/-50ppb max. with 2.5V applied to Pin 1
 Within 10 minutes after switch on +/-10ppb max. w.r.t. frequency tolerance
 Operating Temperature Range 0 to +50C
 Storage Temperature Range -55 to +85C
 Supply Voltage +12.0V d.c. +/-5%
 Supply Current @ +25C  
 During Warm-up 500mA max.
 Steady State 200mA max.
 Output Characteristics  
 Waveform Sinewave
 Output Level 10 +/-3dBm
 Load Impedance 50 Ohms +/-5%
 Harmonic Suppression > 30dBc
 Spurious  
 < +1MHz of nominal frequency < -125dBc
 > +1MHz of nominal frequency < -100dBc
 Frequency Adjustment  
 Frequency Range (Electrical) +/-400ppb min. over voltage control range applied to Pin 1
 Voltage Control Range 0 to +5V
 Reference Voltage Output +5V
 Slope Positive, increasing control voltage increases output frequency
 Linearity 10% max.
 Mechanical  
 Shock 75g for 3ms
 Vibration 10-200Hz at 5g
 Terminals SnAgCu
 Dimensions 50.8 x 50.8 x 12.7 mm
 RoHs Compliant
Pin Connections
1
Voltage Control
2
Reference Voltage Output
3
Output
4
Ground / Case
5
Supply Voltage
Phase Noise Response
Offset Frequency Hz (dBc/Hz) typical
10 -120
100 -140
1K -155
10K -160

We reserve the right to change standard product specifications without notice but will be pleased to consider control drawings for quotation.
T: +44 (0)1376 550220 F: +44 (0)1376 552145 E: sales@atlantecrf.com 40A Springwood Drive, Braintree, Essex CM7 2YN, England