Broadband Noise
Generators

  • 10 Hz - 18GHz
  • High Output, up to +30dBm
  • White Symmetrical Gaussian Noise
  • Test Instrument
  • Flat Output
  • Fine Attenuation Control
  • Standard and Custom Options

The ANG series of general purpose noise generators provide up to 1 watt of white Gaussian noise output in several models over the 10Hz to 18GHz frequency range, with custom options to 40GHz and are designed to be used either as laboratory instruments or as built-in system test facilities.

The noise, which is diode generated, is amplified and the level can be varied in 1dB steps from 0 to 10dB or optionally in 0.1dB steps from 0 to 111dB. Further standard options are available in addition to the ability to provide custom solutions for particular applications.

 General Specifications
 Attenuator Ranges 0 to 10dB in 1dB steps (standard)
0 to 100dB in 10dB steps
0 to 1.0dB in 0.1dB steps
 RF Output Connector SMA Female
 Front Panel RF Output
Attenuator Control knobs
On/Off Switch
 Rear Panel IEC AC Power Connector
AC Power Switch
AC Fuse
 Operating Temperature -10+50C
 Specification Temperature
 +25C
 Input Power
 80-240V @ 50/60Hz
 Instrument Size 14.6 (370) x 4.4 (110) x 11.8 (300) ins. (mm)
Plus Carry / Tilt handle

Model No Frequency Range Out. Pwr.
(dBm nom.)		 Noise
Density
dBm/Hz (nom)		 Output
Flatness
±dB (typ)		 Output
Impedance
Ohms (nom)
ANG-1601 10Hz-20KHz +13 -30 0.5 50
ANG-1603 10Hz-500KHz +13 -44 0.5 50
ANG-1605 10Hz-10MHz +13 -57 0.8 50
ANG-1607 100Hz-100KHz +13 -67 1.0 50
ANG-1608 100Hz-500MHz +10 -77 1.5 50
ANG-1609 100Hz-1GHz +10 -80 2.0 50
ANG-1610 100Hz-1.5GHz +10 -82 2.0 50
ANG-1612 1MHz-2GHz 0 -93 2.5 50
ANG-1613 10MHz-2.5GHz +10 -84 1.5 50
ANG-1624 2GHz-4GHz -10 -103 2.5 50
ANG-2618 2GHz-18GHz -20 -122 3.0 50
ANG-1801 500Hz-20KHz +30 -13 2.0 50
ANG-1803 500Hz-500KHz +30 -27 2.0 50
ANG-1805 500Hz-10MHz +30 -40 2.0 50
ANG-1807 250KHz-100MHz +30 -50 2.0 50
ANG-1808 10MHz-200MHz +30 -53 2.0 50
ANG-1809 1MHz-300MHz +30 -55 2.0 50
ANG-1810 2MHz-500MHz +30 -57 2.0 50
ANG-1811 5MHz-1GHz +30 -60 3.0 50

Options:
01A Alternative 100dB attenuator in 10dB steps (for frequencies up to 2GHz)
01B Alternative 60dB attenuator in 10dB steps (for frequencies over 2GHz)
02A Additional 100dB attenuator in 10dB steps (for frequencies up to 2GHz)
02B Additional 60dB attenuator in 10dB steps (for frequencies over 2GHz)
03 Custom A.C input
04 Signal Combiner input. (6dB signal & noise loss)
05 Marker input
06 19" x 2U rack mount
07 Type N female output connector
08 BNC female output connector (for frequencies up to 2GHz only)
09 75 ohm impedance (6dB loss) (for frequencies up to 2GHz only)
10 Additional 1dB attenuator on 0.1 dB steps (for frequencies up to 2GHz only)
11 Output Switch with TTL Control

Note: Standard Attenuator
0-10dB in 1dB steps for frequencies up to 2.5GHz
0-9dB in 1dB steps for frequencies over 2.5GHz

Custom variations include:

  • Frequency Range
  • Output Power
  • Alternative Connectors
  • D.C. Input Power
  • Dual Outputs
  • Signal Input Attenuator
  • Continuously Variable Attenuators
  • Digitally Remote Controlled Attenuators
  • Filtered Output


We reserve the right to change standard product specifications without notice but will be pleased to consider control drawings for quotation.
T: +44 (0)1376 550220 F: +44 (0)1376 552145 E: sales@atlantecrf.com 40A Springwood Drive, Braintree, Essex CM7 2YN, England