Page 24

AtlantecRF - Cable Catalogue

Ultra Flexible Coaxial Test Cables ABC-CA18 Series • Frequency DC-26.5GHz (subject to connector type) • For Test and System Applications • Velocity of Propagation 70% • Polyurethane Jacket - Blue • Ultra Flexible • Phase Stability +/-2 degrees • Cost Effective • Stock Availability • RoHS Compliant AtlanTecRF’s ABC series of coaxial cable assemblies are designed for general purpose laboratory and equipment applications where flexibility, performance and affordability are key features. With a solid silver plated copper clad inner conductor and PTFE dielectric the outer conductor consists of three layers. The inner layer is silver plated copper tape followed by an interlayer of aluminium tape below the outer layer of silver plated copper braid. The jacket over this is high flexibility polyurethane and at each connector there is a three level polyolefin strain relief. Connectors have passivated stainless steel bodies in either SMA or Type N male. Standard STOCK lengths range from 0.3 to 5.0 metres but custom configurations of both cable length and connector type are also available to order. General Specifications Operating Frequency DC-26.5GHz (SMA); DC-18GHz (Type N) Impedance 50 ohms Velocity of Propagation 70% Phase Stability +/-2 degrees with flexure Insertion Loss 0.8dB/ft. (2.6dB/m) max. @ 18GHz VSWR Refer to table below for Return Loss Capacitance 98pF/m (29.8pF/ft) Insulation Resistance 5000M ohms min. Dielectric Withstand Voltage 1000V RMS Screening Effectiveness 90dB min. Temperature Range -30 to +105C Preferred Bending Radius 120mm Connector Retention Force 100N min. Recommended Mating Torque 0.8Nm - 1.1Nm Centre Conductor Silver Plated Copper Clad Steel Wire Cable Dielectric Solid PTFE Inner Shield Silver Plated Copper Tape Middle Shield Aluminium Tape Outer Shield Silver Plated Copper Braid Cable Jacket Polyurethane - Blue Cable Diameter 5.3mm Marking Sleeve Polyolefin Strain Relief Tube Bonding Black Shrink Tube - 3 level Connector Interface MIL-STD-348 Connector Body Stainless Steel, Passivated Centre Contact Beryllium Copper, Gold Plated Coupling Nut Stainless Steel, Passivated Standard Assembly Lengths 0.3 to 5.0m +/-1% (in 0.5m increments) Tel. +44 (0) 1376 550220 Fax. +44 (0) 1376 552145 Email: sales@atlantecrf.com www.atlantecrf.com 40A Springwood Drive, Braintree, Essex CM7 2YN, England Certificate No. 3875 24 Test Cable Assemblies


AtlantecRF - Cable Catalogue
To see the actual publication please follow the link above